6.2.3. GcodeFile3DSlicer Sequence

This sequence allows locally stored Gcode file obtained through InkScape software to be imported into polychemprint3.Here is what menu of this sequence looks like:

_images/GCode3DMenu.png

P1 through P5 are basic information describing the sequence. P6 gives users options to select the .gcode file. Users can either type in the full file path or type in “File” to opens up a GUI window and choose the matching file like follow:

P7 - P9 Allow the user to set the tool on, off, and travel values. Upon importing FDM Gcode, the program automatically converts from extruder positions to tool on/off triggers.